Brand：Dataray
Model :
BladeCam2-XHR
| Specification | Detail |
|---|---|
| Wavelength |
BladeCam2-XHR/XHR-ND4: 355 to 1150 nm BladeCam2-XHR-1310: 355 to 1350 nm BladeCam2-HR-UV: 190 to 1150 nm |
| Included Filters |
BladeCam2-XHR-ND4: C-mount ND-4 BladeCam2-XHR: C-mount ND-1, ND-2, ND-4 BladeCam2-XHR-1310: C-mount ND-1, ND-2, ND-4 & 1" long pass filter w/ C-mount adapter BladeCam2-XHR-UV: C-mount ND-1, ND-2, ND-4 & 1" absorptive ND-1, ND-2, ND-4 w/ C-mount adapter |
| Pixel Count, H x V | 3.1 Mpixel, 2048 x 1536 |
| Image Area | 6.5 x 4.9 mm |
| Pixel Dimension | 3.2 x 3.2 µm |
| Min. Beam (10 pixels) | ~32 µm |
| Shutter Type | Rolling |
| Max. Full Frame Rate | ≥6 Hz |
| Max. 'Every Pulse' PRR | N/A |
| Single Pulse Capture PRR | N/A |
| Signal to RMS Noise | 1,000:1 |
| (Opt./Elec.* dB) | (30/60* dB) |
| Dynamic Range | 44 dB |
| ADC | 10-bit (1,024 levels) |
| Measurable Sources | CW/Quasi-CW beams |
| Measured Beam Powers | See Saturation Power Graph in datasheet |
| Manual Beam Attenuation | Provided filters, other attenuation accessories available |
| Displayed Profiles |
Line, 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic, Zoom x10 2D, 3D in 10, 32 or max. colors or grayscale Contoured display at 10 and 32 colors |
| Measured & Displayed Profile Parameters |
Raw and smoothed profiles Triangular running average filter up to 10% FWHM |
| Beam Diameter |
Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters |
| Beam Fits |
Gaussian & Top Hat profile fit & % fit Equivalent Slit profile |
| Beam Ellipticity | Major, Minor & Mean diameters. Auto-orientation of axes. |
| Centroid Position |
Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics |
| Measurement Accuracy (not limited to pixel size) |
0.1 µm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent - ~1 µm accuracy is frequently achievable. Centroid accuracy is also beam dependent (as good as ±1 µ since it is arithmetically determined from all pixels above the centroid clip level). |
| Processing Options |
Image & profile Averaging, 1, 5, 10, 20, Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations |
| Update Rates | ≥9 Hz maximum for full frame, full screen. Higher for small Capture Blocks |
| Pass/Fail display | On-screen selectable Pass/Fail colors. Ideal for QA & Production. |
| Log Data and Statistics | Min., Max., Mean, Standard Deviation, to 4096 samples |
| Relative Power Measurement | Rolling histogram based on user's initial input. Units of mW, µJ, dBm, % or user choice (relative to a reference measurement input) |
| Fluence | Fluence, within user defined area |
| Certification | RoHS, WEEE, CE |
| Multiple Cameras |
Up to 4 cameras, parallel capture. 1 to 8 cameras, serial capture. |
| Head Dimensions, Width x Height x Depth | 1.8 x 1.8 x 0.5 in. (46.0 x 46.0 x 12.8 mm) |
| Optical depth from housing/filter to sensor (no window) ±0.2 mm | 4.0/ 8.5 mm (verify before purchasing) |
| Mounting | 1/4"-20 holes aligned with sensor center. 4-40 holes on camera rear. |
| Weight, Camera Head | 85 g (3 oz) |
| Minimum Requirements | Windows 10 64-bit |
Product specifications are subject to change without notice
-
355 to 1150 nm, standard CMOS detector
UV and 1310 nm options available - 3.2 µm pixels, 3.1 MPixel, 2048 x 1536
- 6 fps @ 2048 x 1526, 16 fps @ 1024 x 1024, 35 fps @ 512 x 512
- Port-powered USB 3.0
- HyperCal™ – Dynamic Noise and Baseline Correction software
- C-mount filters included
- 1,000:1 Signal to RMS Noise
- Profiles CW/Quasi-CW beams
- Electronic auto-shutter, 40 µs to 500 ms
- 10-bit ADC
- Parallel capture on multiple cameras
- Field-replaceable image sensors
- Relative power level display
-
Window-free sensors standard for no fringing
- ISO 11146 M² option – beam propagation analysis, divergence, focus
