Model : LBTek
Model :
AMM3
LBTEK Standard O-Type Optical Adjustment Mount adopts a 4-spring design to improve structural stability and vibration resistance. The mount is equipped with 2 or 3 precision adjusters of M5×0.25 or M6×0.25, enabling pitch and yaw angle adjustment of ±3°/±4°. The adjusters can be locked, and axial/radial locking provides long-term stability. M4 counterbore holes are machined on the bottom of the mount for installation and fixation.
| Model | Adjustment Axes | Applicable Optic Diameter/mm | Applicable Optic Thickness/mm | Optic Retention Method |
|---|---|---|---|---|
| AMM3-11BS | 3 | Ø11 | 2.0 (MIN) | M4 nylon-tip set screw |
| AMM3-05A | 3 | Ø12.7 | 3.8 (MAX) | Dual retaining rings |
| AMM3-05B | 3 | Ø12.7 | 2.0 (MIN) | M4 nylon-tip set screw |
| AMM3-1A | 3 | Ø25.4 | 4.0 (MAX) | Dual retaining rings |
| AMM3-1BL | 3 | Ø25.4 | 3.0 (MIN) | M4 nylon-tip set screw |
| AMM3-1BP | 3 | Ø25.4 | 3.0 (MIN) | Dual retention: set screw + elastic pressure ring |
| AMM3-1BP | 3 | Ø25.4 | 3.0 (MIN) | Dual retention: set screw + elastic pressure ring |
| AMM3-30B | 3 | Ø30 | 3.0 (MIN) | M4 nylon-tip set screw |
| AMM3-30BP1 | 3 | Ø30 | 3.0 (MIN) | Dual retention: set screw + elastic pressure ring |
| AMM3-30BP2 | 3 | Ø30 | 3.0 (MIN) | Dual retention: set screw + elastic pressure ring |
| AMM3-1.5A | 3 | Ø38.1 | 6.5 (MAX) | Dual retaining rings |
| AMM3-1.5B | 3 | Ø38.1 | 4.0 (MIN) | M4 nylon-tip set screw |
| AMM3-2A | 3 | Ø50.8 | 5.2 (MAX) | Dual retaining rings |
| AMM3-2B | 3 | Ø50.8 | 4.0 (MIN) | M4 nylon-tip set screw |
- 2-adjuster or 3-adjuster versions available
- Tilt/yaw adjustable angle range: ±4°
- 4-spring design for enhanced structural stability
- Lockable adjusters for long-term stability
